Articles in this section

See more

Wellbeing Pod Mini Maintenance

  • Updated
Follow

How to clean your Wellbeing Pod Mini

Step 1: Disconnect from power source
Step 2: Remove the nozzle
Step 3: Fill the bottle with 2/3 alcohol and run the diffuser for 1 hour
Step 4: Clean the nozzle with a soft cloth and allow to dry
Step 5: Always keep your Wellbeing Pod Mini clean and dry when not in use. Never leave stagnant oil inside the bottle for prolonged periods

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

Unable to remove nozzle

The nozzle has been
inserted into the pod
without a bottle

OR

The nozzle is not aligned
to the indicator on the top
of the pod

Use a needle or
something similar and
insert into the outlet
hole on the top or
bottom of the pod.
You can then push
or pull the nozzle out

Pod will not switch on

Battery insufficiently charged 

OR 

Touch panel is wet

Recharge the unit
as instructed.
Keep the touch panel
dry and avoid touching
with wet hands

Essential oil leaking

he pod has been
overturned or on its side

Clean the unit with
alcohol and wipe dry

 

When you're not using your Wellbeing Pod Mini, we'd recommend keeping your Essential Oil bottle in place so you're ready to switch it back on next time you want to get that wellbeing BOOST, scenting your space with your favourite 100% natural fragrance.

If you decide to remove your essential oil to use somewhere else, then make sure you pop your empty bottle in place beforehand as it can become a little tricky to get into otherwise. Don't worry, if you do put the lid back on without your Essential Oil bottle attached, you can use a small toothpick, or something similar, to gently lift if back out.